Creaform HandySCAN 3D · target selection guide
Which 3D scanning targets work with HandySCAN?
Find Messpunkte 6 mm and 3 mm retro-reflective positioning markers, plus selected 12 mm options for HandySCAN MAX. Compare adhesive strengths, magnetic dots and reusable target holders.
Quick answer: 6 mm reflective target dots are the practical starting point for most HandySCAN marker-based scanning jobs. 3 mm targets help on small or constrained geometry when recognized by your scanner. 12 mm high-reflectivity markers can be useful for selected MAX wide-area workflows.
Choose the target size your scanner can recognize, then decide whether standard, light or strong adhesive, a roll, or a reusable format best suits the part.
Shop Creaform HandySCAN positioning targets
Select your preferred size, format and adhesive strength. Buttons open the corresponding Messpunkte product variant, where current pricing and availability are displayed.
6 mm reflective targets on a roll
4,000 standard-adhesive target dots, ideal for repeated measurement jobs, larger components and high target consumption.
6 mm reflective target sheets
Choose a lighter adhesive for easier removal, standard for general-purpose parts, or strong for greater hold. Test sensitive finishes before application.
3 mm reflective target dots
Smaller markers for scanning constrained features, when the scanner recognizes 3 mm references at the operating distance.
12 mm high-reflectivity targets
Larger reference markers can assist wide-area acquisition in selected HandySCAN MAX setups. Verify the supported operating mode.
Which target format should I choose?
How do HandySCAN positioning markers work?
Reflective target dots help the scanner maintain its position while capturing overlapping scan views. Arrange the markers in an irregular pattern and keep several visible throughout the measurement.
Reusable and specialty reference targets
For repeatable setups, finished surfaces and complex parts, consider these alternatives to applying fresh adhesive dots for every scan.
6 mm magnetic markers
200 reusable magnetic reference dots for compatible steel and other ferrous surfaces.
6 mm glueless targets
210 repositionable 6 mm reflective markers for compatible reusable targeting workflows.
Reusable target strips
40 reusable strips, approximately 340 Ă— 30 mm. Reference dots are sold separately.
Magnetic hex target bases
Multi-face reference holders. Size L supports target dots up to 8 mm, including 6 mm. Confirm configuration and lead time.
For long, prearranged positioning patterns, see the 6 mm endless reflective target strip.
HandySCAN model and reference-target compatibility
These are practical starting specifications for scanner owners. Confirm target recognition for your exact generation, software version and measurement mode before changing marker sizes.
| Scanner model | Main target diameter | Other supported use cases |
|---|---|---|
| HandySCAN 300, 307, 307 Elite, 700, 700 Elite | 6 mm retro-reflective | 3 mm for configurations that recognize smaller dots |
| HandySCAN BLACK, BLACK Elite, BLACK+ Elite | 6 mm retro-reflective | 3 mm for tighter features when supported |
| HandySCAN SILVER, SILVER Elite | 6 mm retro-reflective | 3 mm where recognized by the selected workflow |
| HandySCAN MAX, MAX Elite | 6 mm retro-reflective | 12 mm high-reflectivity markers for selected large-area acquisition workflows |
| HandySCAN MAX EVO family | Confirm your particular target-size settings | 6 mm is a starting point; verify 12 mm recognition before ordering |
Creaform model names identify compatible-use research topics only. Messpunkte target dots are independent aftermarket products, not Creaform OEM consumables.
Do you need scanning spray too?
Positioning markers help the scanner track its position. Matting spray improves surface capture on optically difficult parts. Use ATTBLIME spray when needed, and keep reflective target faces clear.
HandySCAN positioning-target FAQs
What is the standard reference-target size for HandySCAN?
6 mm retro-reflective positioning markers are a common default across HandySCAN generations. Smaller 3 mm targets can work for tighter areas where supported, and certain MAX workflows can use 12 mm markers.
Can HandySCAN MAX use 12 mm reflective targets?
Yes, in selected larger-area reference acquisition workflows. They do not universally replace the 6 mm format. Check the marker recognition settings for your exact MAX configuration.
Are 3 mm target dots more accurate than 6 mm targets?
Not inherently. A smaller marker fits compact surfaces but may be harder to detect consistently from a distance. Accuracy depends on scanner calibration, target visibility and the scanning setup.
Why choose 6 mm sheets instead of the cheaper-per-dot roll?
The 4,000-dot standard-adhesive roll suits frequent scanning and has a lower unit cost. Sheets are convenient for occasional work and offer light or strong adhesive options that are not available in the 6 mm roll variant.
Can magnetic or glueless targets replace adhesive markers?
They can in compatible scanning workflows. Magnetic targets require a secure ferrous surface, while glueless references and reusable strips can suit temporary setups. Keep all references fixed throughout a measurement.
Do target dots need to come from Creaform?
Messpunkte supplies independent aftermarket reflective reference markers. Confirm the required diameter and recognition behavior for your scanner and measurement mode; these are not Creaform OEM products.
Should I use scanning spray with HandySCAN reference dots?
Only when the part surface is difficult to scan. Targets support positioning; ATTBLIME spray improves optical capture on reflective, dark or translucent surfaces. Keep marker faces clear.
What if I use MetraSCAN or C-Track instead?
MetraSCAN and C-Track use different tracking arrangements, including target-free modes on some systems. If your C-Track configuration uses 12 mm references, see the 12 mm Messpunkte variants and confirm your system requirements.
Technical resources and purchasing support
Target-size selection guide · How to apply marker dots · All reference targets · All Messpunkte targets
Need advice about your specific HandySCAN model, part surface or reference-point setup? Contact 3D Scanner Supply.
Technical review: November 2026. Scanner names are used for compatibility guidance only; Messpunkte products are independent aftermarket reference targets.
