Hexagon handheld metrology
Hexagon MARVELSCAN Reference Markers
Shop compatible reflective reference targets for Hexagon handheld laser scanners, with target-free modes clearly explained.
Quick answer: Hexagon lists 3 mm, 6 mm, 12 mm and 16 mm marker recognition for MARVELSCAN. It also supports target-free workflows using a reference backdrop. These specifications apply to MARVELSCAN, not necessarily to ATLASCAN, HYPERSCAN or other Hexagon scanners.
Use the model-specific reference table below for details. A matching marker diameter does not by itself certify scanner compatibility.
Shop recommended reference targets
Choose a size and format, then follow the product link for current prices and availability. These are genuine Messpunkte product photographs; the selected product variant determines the final size and adhesive.
3 mm reflective targets
For MARVELSCAN modes configured to recognize 3 mm references.
6 mm reflective roll
4,000 dots for selected marker-based scanning modes.
12 mm reflective targets
800 standard-adhesive dots for compatible 12 mm recognition.
6 mm magnetic references
Where ferrous surfaces and the scanner's marker recognition permit.
Which format is right for my application?
Match the actual configured diameter: 3, 6, 12 or 16 mm per the manufacturer.
If using reference-backdrop mode, adhesive dots on the part may not be necessary.
Check their model-specific optical tracking settings; do not assume MARVELSCAN specs apply.
For structured-light Hexagon AICON, see the white-reference guide.
Scanner models and target compatibility
| Hexagon technology | Reference markers | Buying note |
|---|---|---|
| MARVELSCAN marker-based mode | 3, 6, 12, 16 mm recognized | Verify selected size |
| MARVELSCAN target-free mode | Reference backdrop | No part dots necessarily required |
| ATLASCAN family | Model-specific | Confirm before buying |
| HYPERSCAN / optically tracked | Different tracking workflow | Check current system setup |
Follow the exact scanner and measurement-mode specification; where manufacturer-supported compatibility has not been established, suggestions are presented as starting points.
Reusable and specialty reference targets
Alternatives to reapplying adhesive markers on every scan, subject to your scanner's recognition and mounting requirements.
6 mm magnetic reflective dots
Reusable magnetic markers for compatible steel surfaces. Keep each marker rigidly positioned throughout the scan.
6 mm glueless markers
210 marker pack for temporary placement, using the exact glueless Messpunkte variant photograph.
Reusable target strips
40 strips for convenient positioning. Reference markers are purchased separately.
Magnetic hex reference bases
Multi-face magnetic bases; size L supports up to 8 mm dots. Request the required configuration and lead time.
Do you need scanning spray, too?
Reference markers support positioning and scan alignment. ATTBLIME matting spray helps capture optically challenging surfaces. Keep markers clear of overspray so the scanner can recognize them.
Frequently asked questions
Can MARVELSCAN use 3 mm and 12 mm references?
Yes. The manufacturer's specifications list 3 mm, 6 mm, 12 mm and 16 mm marker recognition.
Does MARVELSCAN always require dots?
No. A target-free reference-backdrop mode is available for selected workflows.
Do the same sizes apply to ATLASCAN?
Not necessarily. Confirm the specific ATLASCAN model and software mode.
Do I need white or retro-reflective targets?
For MARVELSCAN marker-based laser workflows, reflective references are relevant. Structured-light systems often use different white-on-black dots.
Are magnetic dots compatible?
They may be usable when the scanner recognizes the reference and the ferrous surface keeps it stable.
Technical references and support
Hexagon MARVELSCAN product information · Target selection guide · How to apply marker dots · Compatibility guide · All Messpunkte targets
Not sure about target diameter, surface finish or scanner software mode? Ask 3D Scanner Supply before ordering.
Technical review: November 2026. Scanner names identify potential applications only. Messpunkte reference markers are independent aftermarket consumables; a matching nominal size alone does not guarantee optical compatibility.
